LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> LW200 >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust >> Repair Instructions >> Fuel Tank Heat Shield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing & Installing Fuel Tank Heat Shield
    GM892450Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the heat shield and tighten the fasteners.

    Tighten:  Tighten the heat shield-to-rear cross member to 8 N.m (71 lb in).

  2. Lower the vehicle from the hoist.
scientia non olet · About LEMON Manuals