LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> L300 >> Repair and Diagnosis >> Body & Frame >> Seats >> Repair Instructions >> Seat Adjuster Mechanism Replacement - Power >> Installation Procedure

Installation Procedure

    Fig 1: Removing & Installing Seat Cushion Frame
    GM896768Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the frame to the seat adjuster and install the fasteners.

    Tighten:  Tighten the fasteners to 20 N.m (15 lb ft).

    2. Fig 2: Heated Seat Wiring Connector From Seat Frame Harness
    GM1199342Courtesy of GENERAL MOTORS CORP.
  2. Connect the heated seat wiring connector to the seat frame harness.
    3. Fig 3: Removing & Installing Seat Cover J-Strip
    GM897273Courtesy of GENERAL MOTORS CORP.
  3. Install the seat cushion cover J-strip to the seat frame at the back of the cushion.
    4. Fig 4: Removing/Installing Recliner Fasteners & Seat Back Assembly
    GM896778Courtesy of GENERAL MOTORS CORP.
  4. Install the seat back assembly and install the recliner fasteners.

    Tighten:  Tighten the fasteners to 35 N.m (26 lb ft).

  5. Install the outer finish panel. Refer to Finish Panel Replacement - Front Seat - Front (Inner)  or Finish Panel Replacement - Front Seat - Front (Outer) .
  6. Install the inner recliner finish panel. Refer to Finish Panel Replacement - Front Seat - Front (Inner)  or Finish Panel Replacement - Front Seat - Front (Outer) .
  7. Install the front seat. Refer to Seat Replacement - Front Bucket .
scientia non olet · About LEMON Manuals