LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> L200 Standard >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling >> Repair Instructions >> Surge Tank Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Attaching Surge Tank To Mounting Tabs
    GM893760Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector for the low coolant level sensor to the surge tank.
  2. Slide the surge tank onto the lower and rail mounting tabs.
    3. Fig 2: Removing & Installing Rear Surge Tank Attachment Clip
    GM893758Courtesy of GENERAL MOTORS CORP.
  3. Install the surge tank rear retaining clip.
    4. Fig 3: Removing & Installing Surge Tank Return Hose
    GM893750Courtesy of GENERAL MOTORS CORP.
  4. Install the return hose to the surge tank.
  5. Install the clamp at the 2 o'clock position.
  6. Install the coolant air bleed hose to the surge tank.
  7. Install the hose clamp to the 1 o'clock position.
  8. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Battery.
  9. Fill the cooling system. Refer to Draining and Filling Cooling System .
scientia non olet · About LEMON Manuals