LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> L200 Standard >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System >> Repair Instructions >> Hose Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing & Installing Washer Nozzle Hole Plugs
    GM894186Courtesy of GENERAL MOTORS CORP.
  1. Reconnect the washer hoses to the washer nozzles.
  2. Remove the tape from the old and new hose and remove the stud.
  3. Connect the passenger side washer hose to the Y fitting on the drivers side of the vehicle.
  4. Inspect the hose routing.
  5. Inspect the wiper/washer system for proper operation.
  6. Install the 2 washer nozzle hole plugs.
scientia non olet · About LEMON Manuals