Scan Tool Data Definitions
- Battery 1
-
The scan tool displays 0-25.5 volts. The state of the battery voltage supplied to the body control module (BCM).
- Front Washer Motor Input
-
The scan tool displays On/Off. This input displays On when the front washer spray is on.
- Front Wiper Relay Cmd.
-
The scan tool displays On/Off. The body control module will indicate if it is commanding the front wiper relay On or Off.
- Front Wiper Relay Fdbk.
-
The scan tool displays High/Low. This input to the BCM displays the state of the front wiper relay feedback circuit. Low is displayed when the BCM is providing a ground to the front wiper relay control circuit.
- Front Wiper Switch
-
The scan tool displays On/Off. This input displays On when the front wipers are ON.
- Washer Fluid Level
-
The scan tool displays Low or Ok. The BCM will display Low when the washer fluid level is Low.
- Wiper Delay 1
-
The scan tool displays Yes/No. This input to the body control module displays the state of the wiper delay switch.
- Wiper Delay 2
-
The scan tool displays Yes/No. This input to the body control module displays the state of the wiper delay switch.
- Wiper Delay 3
-
The scan tool displays Yes/No. This input to the body control module displays the state of the wiper delay switch.
- Wiper Delay Input
-
The scan tool displays volts. This input displays the voltage supplied to the body control module.