Wiper/Washer System Description and Operation: Notes

The windshield wiper/washer System consists of front and rear wipers, wagon only. The front and rear wipers are operative when the vehicle is in ACCESSORY or RUN. The front wipers have 4 different modes. The 4 modes are MIST, Intermittent, Low, and High. When the wipers are in the intermittent mode, there are 3 delay modes to chose from, commanded by the wiper switch through the body control module (BCM). There is one mode for the rear wipers. The rear wipers have an intermittent mode only, and the intermittent mode has 3 delay modes to chose from. The wipers are powered through the wiper switch except for the intermittent mode. The intermittent mode is controlled by the BCM. The front and rear wipers also have a washer function. By putting the wiper switch in the wash mode the front and rear wipers will spray washer fluid on the windshield and the wipers will then clean the windshield. The wipers will be controlled by the BCM.