LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> L200 Automatic >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Ignition Lock Cylinder Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Removing Ignition Switch Bezel
    GM862575Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable.
  2. Remove the lock cylinder bezel from the steering column shroud by carefully prying with a thin-bladed screwdriver.
    3. Fig 2: Removing Lower Steering Column Cover & Screws
    GM870643Courtesy of GENERAL MOTORS CORP.
  3. Remove the steering column upper trim panel. Refer to Steering Column Trim Covers Replacement .
    4. Fig 3: Locating Ignition Module Lock Button
    GM892474Courtesy of GENERAL MOTORS CORP.
  4. Insert the key into the lock cylinder and rotate to START position.
    5. IMPORTANT: While rotating the cylinder back to the START position, depress the locking button on the top of the ignition module with a thin pick-type tool.
  5. Slide the lock cylinder from ignition lock cylinder case.
scientia non olet · About LEMON Manuals