LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> L200 Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical >> Repair Instructions >> On Vehicle Repair Instructions >> Engine Oil Pressure Sensor and/or Switch Replacement >> Installation Procedure

Installation Procedure

  1. Apply the RTV sealant, or equivalent, to the EOP switch threads.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the EOP switch.

    Tighten:  Tighten the engine oil pressure switch to 10 N.m (89 lb in).

  3. Connect the EOP switch harness connector. Push in the connector until a click is heard, then pull back to confirm a positive engagement.
  4. Check the oil level and fill if low.
  5. Start the engine and check the engine for leaks.
scientia non olet · About LEMON Manuals