LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> L200 Automatic >> Repair and Diagnosis >> Electrical >> Horns >> Repair Instructions >> Horn Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing & Installing Horn
    GM886910Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: If the tuning bracket is removed from the horn, position the bracket in the exact position as before and tighten to 12 N.m (106 lb in), then inspect the horn for proper operation.
  1. Position the horn to the horn bracket.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the horn-to-horn bracket attaching the nut.

    Tighten:  Tighten the nut to 18 N.m (13 lb ft).

  3. Install the horn bracket onto the frame rail stud (1).
  4. Install the horn bracket-to-frame rail attaching nut (3).

    Tighten:  Tighten the nut to 20 N.m (15 lb ft).

  5. Connect the electrical connector to the horn (4).
  6. Reposition the suction/liquid line clamp to the horn bracket stud.
  7. Install the suction/liquid line clamp nut.

    Tighten:  Tighten the nut to 10 N.m (89 lb in)

scientia non olet · About LEMON Manuals