LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2003 >> Ion 1 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (Engine Controls (Introduction)) >> Repair Instructions >> Air Cleaner Element Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the IAT sensor harness connector.
    2. Fig 1: View Of IAT Sensor Harness Connector
    GM851290Courtesy of GENERAL MOTORS CORP.
  2. Loosen the air cleaner assembly clamp.
  3. Disconnect the air cleaner assembly clips.
  4. Remove the upper air cleaner cover.
  5. Remove the air cleaner filter from the lower air cleaner housing.
  6. Inspect the air cleaner filter for dust, dirt and water contamination.
    7. Fig 2: Exploded View Of Air Cleaner Filter
    GM851250Courtesy of GENERAL MOTORS CORP.
  7. Replace as necessary. Refer toScheduled Maintenance in Maintenance and Lubrication.
scientia non olet · About LEMON Manuals