LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> Vue 2.2 D, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1635 (Cruise Control System) >> Repair Instructions >> Cruise Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Ion 3, 2003 Saturn Ion 2, and 2003 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Aligning Cruise Control Cable
    GM329483Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Battery.
  2. Disconnect the cruise control module harness connector.
  3. Disconnect the cruise control cable from the cruise control module by turning the cable 1/4 turn counterclockwise.
  4. Fig 2: Locating Cruise Control Cable
    GM854297Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the cruse control cable (1) from the accelerator pedal.
  6. Remove the nuts (2) from the cruise control module.
  7. Remove the cruse module from the vehicle.