Electronic Control System
The TCM constantly monitors all transaxle electrical circuits. If the TCM detects circuit problems or sensors out of range, it will record a Diagnostic Trouble Code (DTC). If problem continues for a predetermined time, Malfunction Indicator Light (MIL) will light.
If MIL is on all the time, DTC(s) are currently being detected. If MIL is off, but TCM had detected a circuit or sensor problem, DTC(s) will be stored in computer memory.
Stored DTCs may be retrieved from TCM memory using a scan tool. DTCs CANNOT be retrieved by grounding 16-pin Data Link Connector (DLC).
NOTE:
Faulty engine sensors and actuators may cause transaxle-related DTCs or driveability problems. Engine faults and related DTCs must be diagnosed and repaired before transaxle DTCs are repaired. For additional information on diagnosing and repairing engine-related DTCs, see appropriate SELF-DIAGNOSTICS article in ENGINE PERFORMANCE.