LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SL2 Standard, MP2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Air Bag Restraint Systems) >> Diagnostic Tests >> DTC B0026: Driver Deployment Loop Open >> Conditions For Setting DTC

Conditions For Setting DTC

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2000 Saturn SW2, 2000 Saturn SL2, 2000 Saturn SL1, 2000 Saturn SL, and 2000 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.

DTC sets when IGN 1 voltage is present at SDM and driver deployment loop resistance is more than 4.8 ohms. DTC will also set if circuit 347 voltage is less than 2 volts and resistance is more than 6 ohms. Fault must be present for 0.5 second.

scientia non olet · About LEMON Manuals