Shift Cable: Installation
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
- Install the shift control cable to the vehicle. See Figure . Slide the transaxle range selector cable (1) fully into the console until it snaps into place. Connect the transaxle range selector cable terminal to the shift lever pin. See Figure .
- Install the console trim plate. See appropriate SHIFT INTERLOCK SYSTEMS article in AUTOMATIC TRANSMISSIONS. Install the left console trim panel.
- Insert the transaxle range selector cable into the bracket. See Figure . Connect the transaxle range selector cable terminal to the transaxle manual shift lever pin.
- Insert the retainer to the shift cable mechanism. See Figure . Adjust the shift cable. See SHIFT CABLE under ADJUSTMENTS.