LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Specifications & Procedures) >> Wheel Alignment Procedures >> Camber Adjustment >> "L" Series (Front)

"L" Series (Front)

WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2001 Saturn SW2, 2001 Saturn SL2, 2001 Saturn SL1, 2001 Saturn SL, and 2001 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Rear camber is not adjustable.
  1. Lock steering wheel in straight-ahead position. Raise vehicle on hoist. Remove front wheels. Remove and discard 2 strut-to-knuckle bolts. Using a file, elongate strut bracket lower hole. To increase negative camber, elongate outside of lower strut hole. To decrease negative camber, elongate inside of lower strut hole. See Figure . Paint exposed metal with primer or anti-rust paint. While holding wheel in position, tighten 2 NEW strut-to-steering knuckle bolts to specification. See TORQUE SPECIFICATIONS  .
  2. Reinstall wheels. Lower vehicle from hoist and check camber. Adjust as necessary. To adjust, move top of wheel in or out. See Figure . Repair or replace damaged suspension components.
scientia non olet · About LEMON Manuals