LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SC2 Automatic, MP6 >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Wheel & Column >> Repair Instructions >> Intermediate Steering Shaft Replacement >> Installation Procedure

Installation Procedure

Fig 1: View Of Ignition Module Assembly And Steering Column
GM860852Courtesy of GENERAL MOTORS CORP.
IMPORTANT: Use Loctite 242® (or equivalent) on threads of pinch bolt.
  1. From inside vehicle, position intermediate steering shaft onto steering column and install pinch bolt.

    Tighten:  Tighten Intermediate Steering Shaft-to-Column Pinch Bolt 47 N.m (35 lbs ft).

    CAUTION: Ensure that the vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a hoist, provide additional support for the vehicle on the opposite end from which the components are being removed.
  2. Raise vehicle on hoist.
    IMPORTANT: Use Loctite 242® (or equivalent) on threads of pinch bolt.
  3. Position intermediate steering shaft onto pinion and install pinch bolt.

    Tighten:  Tighten Intermediate Steering Shaft-to-Steering Gear Pinch Bolt 47 N.m (35 lbs ft).

  4. Slide cover over intermediate steering shaft and attach securely to steering gear.
  5. Lower vehicle from hoist.
scientia non olet · About LEMON Manuals