Removal Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Open the hood.
- Remove the headlamp motor/actuator knob cover.
- Rotate the headlamp motor/actuator manual control knob counterclockwise to raise the headlamp.
- Disconnect the headlamp wiring harness electrical connector from the forward lamp wiring harness.
- Apply tape to the area around the headlamp opening to protect the paint.
- Remove the headlamp bezel. Refer to Headlamp Bezel Replacement .
- Remove the headlamp capsule retaining screws.
- Disconnect the headlamp bulb/socket electrical connectors.
- Remove the capsule from the headlamp pivot and adjusting bracket.
- Remove the headlamp bulb/sockets from the capsule.
NOTE:
Refer to Notice - Apply Tape When Removing Body Panels in Cautions and Notices.
IMPORTANT:
Support the headlamp capsule while removing the retaining screws.
CAUTION:
Refer to Halogen Bulb Caution in Cautions and Notices.