LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SC2 Automatic, MP6 >> Repair and Diagnosis >> External Pages >> Different car >> Section 162 (Battery, Charging System & Starting System) >> Repair Instructions >> Generator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
    Fig 1: Positive & Negative Battery Cable
    GM675304Courtesy of GENERAL MOTORS CORP.
  1. Remove the accessory drive belt. Refer to Drive Belt Replacement - Accessory in Engine Mechanical - 5.7 L.
  2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  3. Fig 2: Generator Electrical Connector Engine Harness Terminal
    GM651874Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the generator electrical connector (1).
  5. Remove the engine harness terminal from the generator:
    1. Slide the boot back along the cable.
    2. Remove the engine harness cable nut (3).
    3. Remove the engine harness terminal from the stud.
  6. Fig 3: Generator Bolts & Generator
    GM74067Courtesy of GENERAL MOTORS CORP.
  7. Remove the generator bolts and the generator.