LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> SC1 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 172 (Lighting Systems) >> Repair Instructions >> Backup Lamp Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Backup Lamp Assembly To Vehicle
    GM64620Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear license frame.

    Release the locking tabs with a flat-bladed screwdriver.

  2. Remove the rear license plate.
  3. Remove the backup lamp assembly retaining screws.
  4. Partially remove the backup lamp assembly to expose the backup lamp sockets.
  5. Remove the backup lamp sockets from the backup lamp assembly.

    Rotate the sockets counterclockwise to release the locking tabs.

  6. Remove the backup lamp assembly from the vehicle.
scientia non olet · About LEMON Manuals