LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> LW200 Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis - 4T40-E >> Removal & Installation >> Powertrain Control Module >> Installation

Powertrain Control Module: Installation

  1. Slide PCM into rear lip of PCM bracket.
  2. Push down on PCM until two retaining clips are secure.
  3. Connect PCM J1 and J2 harness connectors.
  4. Connect negative battery cable. Tighten battery terminal bolt to 13 ft. lbs. (17 N.m).
  5. Reprogram PCM.
scientia non olet · About LEMON Manuals