Installation Procedure
WARNING: This page is about a different car, the 2003 Saturn LW200 and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.
- Position the flywheel on the crankshaft as previously noted.
- Install the flywheel bolts.
Tighten: Tighten the flywheel bolts to 53 N.m (39 lb ft) plus 25 degrees.
- Install the transmission. Refer to Transmission Replacement in Automatic Transaxle - 4T40-E/4T45-E.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.