LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> LW200 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 280 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Console Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Console
    GM896495Courtesy of GENERAL MOTORS CORP.
  1. Position the console into the vehicle.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the console front fasteners.

    Tighten:  Tighten the fasteners to 2.5 N.m (22 lb in).

  3. Move the seats forward. Install the console rear fasteners.

    Tighten:  Tighten the fasteners to 2.5 N.m (22 lb in).

  4. Install the shift lever boot. Refer to Shift Control Boot Replacement in Automatic Transaxle - 4T40-E/4T45-E.
  5. Connect the console wiring harness to the main body harness located under the front console tray.
  6. Install the cupholder assembly. Refer to Cupholder Replacement .
  7. Install the power window switch, if equipped. Refer to Power Window Switch Replacement in Doors.
    8. Fig 2: Removing & Installing Park Brake Boot
    GM1230113Courtesy of GENERAL MOTORS CORP.
  8. Snap the park brake boot into place.
    9. Fig 3: Removing & Installing Console Trim Panels
    GM896493Courtesy of GENERAL MOTORS CORP.
  9. Install the console trim panels.
scientia non olet · About LEMON Manuals