LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> LW200 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 271 (Battery) >> Repair Instructions >> Battery Tray Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lift the UHFB and position the battery tray on the studs.
  2. Install the bolts and nuts.

    Tighten:  Tighten the battery tray fasteners to 15 N.m (11 lb ft).

  3. Install the negative battery cable on the chassis stud.

    Tighten:  Tighten the negative battery cable to chassis to 12.5 N.m (9.5 lb ft).

  4. Fasten the UHFB harness in the loops.
  5. Install the bolt securing the UHFB to the battery tray.
  6. Roll the UHFB towards the fender and snap the tabs.
  7. Install the coolant tank hose on the UHFB cover.
  8. Install the battery. Refer to Battery Installation  .
scientia non olet · About LEMON Manuals