Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying HVAC Control Assembly Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connectors to the HVAC control module.

Fig 2: Removing & Installing HVAC Control Assembly-To-Instrument Panel Screws

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTIC in Cautions and Notices

Install the screws that secure the HVAC control module to the I/P.
Tighten: Tighten the screws to 2.5 N.m (22 lb in).

Fig 3: Removing & Installing Radio

Courtesy of GENERAL MOTORS CORP.

Install the radio electrical and antenna connectors.
Install the radio.

Fig 4: Removing & Installing Radio Mounting Screws

Courtesy of GENERAL MOTORS CORP.

Install the screws that secure the radio to the I/P.
Tighten: Tighten the screws to 2.5 N.m (22 lb in).

Fig 5: Removing & Installing Radio Bezel Trim Plate

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector.
Install the radio trim bezel.