Adjustment Procedure
- Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door .
- Remove the front door water deflector. Refer to Water Deflector Replacement - Front Door .
- Loosen the rear most window regulator bolt.
- Lower the window to the 3/4 down position.
- Push the window rearward to seat in the rear window run channel.
Bring pressure against the rear channel.
- Tighten the rear most window regulator bolt.
Tighten: Tighten the bolt to 10 N.m (89 lb in).
- Inspect the window for proper operation. If binding exists, inspect all of the weatherstrips and adjust as necessary.
- Install the front door water deflector. Refer to Water Deflector Replacement - Front Door .
- Install the front door trim panel. Refer to Trim Panel Replacement - Side Front Door .
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.