Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing & Installing Prop Rod & Bracket

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the prop rod bracket and screws.
Tighten: Tighten the screws to 8 N.m (71 lb in).
Remove the auxiliary prop device.
Close the hood.