LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> L200 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 298 (Seats) >> Repair Instructions >> Head Restraint Guide Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing Head Restraint Guides
    GM897777Courtesy of GENERAL MOTORS CORP.
  1. Install the head restraint guides to the seat back frame.
    2. Fig 2: Connecting Seat Back Cover Wire At Wire Retainer
    GM897771Courtesy of GENERAL MOTORS CORP.
  2. Snap the seat back cover wire to the wire retainer.
  3. Install the remaining seat back cover trim by folding the trim down.
    4. Fig 3: Locating Seat Back Cover Hook Retainers
    GM866891Courtesy of GENERAL MOTORS CORP.
  4. Connect the hook retainers to the seat back cover bottom.
    5. Fig 4: Removing & Installing Lumbar Knob
    GM897941Courtesy of GENERAL MOTORS CORP.
  5. If equipped, install the lumbar knob by pushing firmly on the knob.
    6. Fig 5: Removing & Installing Inner Recliner Finish Panel Screws
    GM897798Courtesy of GENERAL MOTORS CORP.
  6. Install the inner recliner cover and fasteners.

    Tighten:  Tighten the fasteners to 25 N.m (22 lb in).

  7. Install the outer set finish panel. Refer to Finish Panel Replacement - Front Seat - Front (Inner)  or Finish Panel Replacement - Front Seat - Front (Outer) .
  8. On manual seats, install the recliner handle. Refer to Seat Back Recliner Handle Replacement - Front .
    9. Fig 6: Removing/Installing Front Seat
    GM896861Courtesy of GENERAL MOTORS CORP.
  9. Install the seat into the vehicle. Refer to Seat Replacement - Front Bucket .
scientia non olet · About LEMON Manuals