LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> L200 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Rear Suspension System) >> Repair Instructions >> Spring Bolt and Insulators Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Transverse Spring, Nuts & Bolts
    GM65327Courtesy of GENERAL MOTORS CORP.
  1. Position the rear transverse spring to the lower control arms.
  2. Install the transverse spring bolts (2), insulators and nuts.
    3. Fig 2: J 33432-A & Spring
    GM65323Courtesy of GENERAL MOTORS CORP.
  3. Release and remove J 33432-A  from the transverse spring.
    4. Fig 3: Measuring The Spring Stud Height
    GM200316Courtesy of GENERAL MOTORS CORP.
  4. Set the transverse spring stud height (1) to the height measured during removal.
  5. Install the retainers to the bolts.
  6. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals