LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> L100 >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Ignition and Start Switch Replacement >> Installation Procedure

Installation Procedure

Fig 1: Removing & Installing Ignition Switch
GM881945Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors.
  2. Position the ignition switch.
    NOTE: Refer to FASTENER NOTICE .
  3. Install the ignition switch fasteners.

    Tighten 

    Tighten the ignition switch fasteners to 1.5 Nm (13 lb in).

    4. Fig 2: Removing & Installing Steering Column Trim Covers
    GM870643Courtesy of GENERAL MOTORS CORP.
  4. Install the steering column upper trim cover. Refer to Steering Column Trim Cover Replacement .
  5. Install the lock cylinder bezel.
scientia non olet · About LEMON Manuals