LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> L100 >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Ignition Lock Cylinder Replacement >> Installation Procedure

Installation Procedure

Fig 1: Setting Ignition Module Actuator Blade In RUN Position Prior To Installation
GM877940Courtesy of GENERAL MOTORS CORP.
IMPORTANT: The actuator blade within the ignition module housing must be in the RUN position to install the lock cylinder assembly. If rotated, replace it to the RUN position using needlenose pliers.
  1. Insert the key into the ignition lock cylinder and install it into the ignition lock cylinder case.
    2. Fig 2: Removing & Installing Steering Column Trim Covers
    GM870643Courtesy of GENERAL MOTORS CORP.
  2. Install the steering column upper trim cover. Refer to Steering Column Trim Cover Replacement .
  3. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals