LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> L100 >> Repair and Diagnosis >> External Pages >> Different car >> Section 304 (Front Suspension) >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
    2. Fig 1: Removing & Installing Stabilizer Shaft Link
    GM891976Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not allow the ball stud to rotate when installing the ball stud nut.
  2. Install the stabilizer link to stabilizer shaft ball stud nut. Hand tighten only.
    3. NOTE: Refer to FASTENER NOTIC in Cautions and Notices.
  3. Install the stabilizer link to strut assembly ball stud nut.

    Tighten:  Tighten both Ball stud nuts to 65 N.m (48 lb ft).

  4. Remove the stabilizer link from the vehicle.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals