Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing & Installing Ignition Switch

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connectors.
Position the ignition switch.

NOTE: Refer to FASTENER NOTIC in Cautions and Notices.

Install the ignition switch fasteners.
Tighten: Tighten the ignition switch fasteners to 1.5 Nm (13 lb in).

Fig 2: Installing Lower Steering Column Cover & Screws

Courtesy of GENERAL MOTORS CORP.

Install the steering column upper trim cover. Refer to Steering Column Trim Covers Replacement .
Install the lock cylinder bezel.