Installation Procedure
WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.
IMPORTANT:
Clean any existing oxidation from the contact face of the battery terminal and battery cable using a wire brush before installing the battery cable to the battery terminal.
- Connect the battery negative cable to the battery.
Tighten: Tighten the bolt to 17 N.m (13 lb ft).
- Reset the radio stations and the clock.