Removal Procedure

Remove the mirror face. Refer to Mirror Face Replacement .

Fig 1: Removing & Installing Mirror Trim Cover

GM953210

Courtesy of GENERAL MOTORS CORP.

Remove the mirror trim panel by pulling out at the top.

Fig 2: Outside Rearview Mirror Insulator

GM459511

Courtesy of GENERAL MOTORS CORP.

Remove the foam filler.

Fig 3: Connecting Mirror Motor Electrical Connector

GM953235

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector from the mirror wire harness.

Fig 4: Removing & Installing Mirror Motor Screws

GM953231

Courtesy of GENERAL MOTORS CORP.

Remove the screws from the mirror motor.
Pull the motor electrical harness through the mirror housing.
Remove the mirror motor from the mirror housing.