LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2001 >> SC2 Automatic, MP7 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0340: Cam Sensor Circuit >> Code Enable Criteria

Code Enable Criteria

DTC sets when PCM cam pulse has not been properly detected (cylinder No. 4 signal line not pulled to ground) for 136 engine revolutions when MAP sensor is greater than 30 kPa.

If PCM detects 20 correct cam pulses in a row, DTC will pass for remainder of ignition cycle.

scientia non olet · About LEMON Manuals