LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2000 >> SW2 Standard >> Repair and Diagnosis >> Transmission >> Manual Transmission Clutches >> Manual Transaxle Removal And Installation >> Control Lever Boot Assembly (On-Vehicle) >> Installation

Control Lever Boot Assembly (On-Vehicle): Installation

  1. Place the boot on the shifter control assembly and clip the two plastic retainers in the front of the shifter control assembly.
  2. Clip the boot assembly onto the plastic retainer in the rear of the shifter control assembly.
  3. Install console. Refer to CONSOLE  .
  4. Enable SIR system.
scientia non olet · About LEMON Manuals