SOHC Engine
- Remove air intake tube at throttle body. Observe position of throttle plate. Adjust cruise control cable by depressing at locations shown to release cruise control cable adjuster. See Figure . Slide cruise control cable adjuster away from cruise control module. Turn ignition switch to ON position. Using scan tool, measure and read Throttle Position (TP) sensor voltage.
- Slide cruise control cable adjuster toward cruise control module until .040-.079" (1-2 mm) clearance is reached between cruise control cable adjuster and accelerator pedal bracket. Every click of cruise control cable adjuster is about .040-.079" (1-2 mm) of movement. Ensure that a slight amount of free play exists in accelerator cable. Using scan tool, ensure TP sensor voltage is not more than previously measured voltage.