Removal & Installation
WARNING: This page is about a different car, the 2000 Chevrolet Corvette, 1999 Chevrolet Corvette, and 1998 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Lower door panel retainers are 2-piece. Male fastener is attached to door panel and female retainer is attached to door. To avoid breaking door panel fasteners, pry between male fastener and female retainer.
- Lower appropriate door window. Remove inside door handle bezel. Remove pull handle plug for access to 2 door panel screws. Remove 2 screws from behind pull handle plug. Pry lower door panel fasteners loose from door.
- Lift door panel up and off upper retainers. Disconnect electrical connectors from door panel. Set door panel aside. Remove door speaker assembly. Remove mirror nut access plugs. Disconnect mirror wiring harness from retainers. Remove nuts from mirror studs. Remove mirror along with harness and gasket.
- To install, reverse removal procedure. Tighten power mirror nuts and door speaker assembly screws to specification. See TORQUE SPECIFICATIONS .