Rear Wiper/Washer Switch
Remove steering column covers to access connectors on back of multifunction switch (combination switch). Disconnect wiper/washer switch connector from right side of multifunction switch. Measure resistance across switch terminals. See REAR WIPER/WASHER SWITCH RESISTANCE table. See Figure. If resistance is not as specified, replace wiper/washer switch. See REMOVAL & INSTALLATION in appropriate STEERING COLUMN SWITCHES article.
REAR WIPER/WASHER SWITCH RESISTANCE
| Switch Position & Terminals (1) | Value | |||
|---|---|---|---|---|
| OFF | ||||
| A, B & M | Continuity | |||
| ON | ||||
| A, B & M | Continuity | |||
| E & F | Continuity | |||
| WASH | ||||
| A & M | Continuity | |||
| B, E & F | Continuity | |||
|
||||