LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2000 >> SC1 Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Induction System >> Removal & Installation >> Air Pipe >> Installation

Air Pipe: Installation

NOTE: Installation steps must be performed in sequence.
NOTE: Make sure gaskets are installed correctly or a leak will occur. If gaskets are removed from studs, replace with new gaskets.
  1. Install air pipe onto exhaust manifold studs.
  2. Install air pipe into rear air compressor bracket slot.
  3. Install air pump solenoid/combination valve assembly studs into air compressor bracket through air pipe flange holes.
  4. Install and torque nuts on combination valve studs.

    Torque: 

    Air Pipe Nut (At Combination Valve): 7 N.m (62 in-lbs) 

  5. Install and torque nuts on exhaust manifold studs.

    Torque: 

    Air Pipe Nut (At Exhaust Manifold): 7 N.m (62 in-lbs) 

scientia non olet · About LEMON Manuals