LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2000 >> LS1 Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Removal & Installation, Overhaul >> Ignition System >> Ignition Control Module (IDI) >> Installation (2.4L)

Installation (2.4L)

NOTE: DO NOT wipe grease from module or coil if module is not being replaced. If installing a NEW module, spread silicone grease on metal face of module and on cover where module seats. Grease is included with NEW module and is necessary for module cooling purposes.

To install, reverse removal procedure. Tighten screws and bolts to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals