LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 1999 >> SL2 Standard, MP2 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System Removal, Installation & Overhaul >> Fuel System >> Throttle Position (TP) Sensor >> Removal & Installation (1.0L, 1.3L & 1.8L)

Removal & Installation (1.0L, 1.3L & 1.8L)

  1. Disconnect negative battery cable. On 1.0L, disconnect PCV hose and Intake Air Temperature (IAT) sensor harness connector. Remove air cleaner assembly. On all models, disconnect harness connector from TP sensor. Remove TP sensor retaining screws. Remove TP sensor from throttle body.
  2. To install, mount TP sensor on throttle body with alignment slots slightly counterclockwise of body holes. Turn TP sensor clockwise to align holes and install retaining screws finger tight. To complete installation, reverse removal procedure. Adjust TP sensor. See THROTTLE POSITION (TP) SENSOR in appropriate ON-VEHICLE ADJUSTMENTS article. Tighten TP sensor retaining screws to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals