Passenger-Side Inflator Module: Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1996 Saturn SW2, 1996 Saturn SW1, 1996 Saturn SL2, 1996 Saturn SL1, and 1996 Saturn SL. However, it is still accessible from the selected car via links, so may be relevant.
- Install passenger inflator module. Engage all inflator module wiring harness connector clips to cross car beam and energy absorber. See Figure .
- Install glove box assembly and striker. Install glove box door stops.
- Activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Ensure proper system function. See SYSTEM OPERATION CHECK .