Cruise Control Cable
NOTE:
Cruise control cable and adjuster assembly are not repairable or replaceable. DO NOT attempt to remove cable and adjuster from cruise module. Damage to cruise module could result.
- Remove air intake tube at throttle body. Observe position of throttle plate. Adjust cable by pulling forward and turning ring on adjuster until throttle blade is fully closed. Loosen ring 1/2 turn (2-3 clicks).
- With throttle plate closed (throttle position sensor at 0 percent), adjust cruise control cable to .040-.079" (1-2 mm) of cable free play. See Fig 1 . Install air intake tube.