Inflator Module: Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1993 Saturn SW2, 1993 Saturn SW1, 1993 Saturn SL2, 1993 Saturn SL1, and 1993 Saturn SL. However, it is still accessible from the selected car via links, so may be relevant.
Connect electrical connectors to module. Install module using 4 NEW mounting screws. Tighten mounting screws to specification. See TORQUE SPECIFICATIONS table at the end of this article. Activate SIR system. Perform system operation check to ensure system is functioning properly. See TESTING - SYSTEM OPERATION CHECK .