Gearshift Cable
- Place gear selector in Park position. Raise and support vehicle. Disconnect cable assembly at transaxle control lever. Ensure transaxle control lever is turned fully clockwise, in Park.
- Using a small screwdriver, pry up cable adjuster lock tab. See Fig 1
. Reconnect cable assembly to transaxle control lever. Ensure cable housing moves freely inside adjuster housing. Move cable housing back and forth and note amount of end play.
- Adjust cable by moving cable housing 1/2 the amount of total end play. Press lock tab down and ensure cable housing is secure. Check park lock cable adjustment. See PARK LOCK CABLE
.
Courtesy of GENERAL MOTORS CORP.