LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 1994 >> SC2 Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pump >> Removal & Installation

Removal & Installation

  1. Disconnect negative battery cable. Relieve fuel pressure. See FUEL PRESSURE RELIEF . Remove filler neck. Lower fuel tank. Disconnect fuel lines and electrical connection.
  2. Remove fuel level sending unit and fuel pump retaining bolts or cam lock ring. Lift assembly from fuel tank and remove fuel pump from sending unit.
  3. Pull fuel pump upward while pulling away from bottom support. Use care not to damage rubber insulator and strainer. To install, reverse removal procedure using NEW "O" ring and gasket.
scientia non olet · About LEMON Manuals