Diagnostic Aids
- Drive vehicle at speed faster than 25 MPH (40 km/h) with brake pedal released. Check for reappearance of Code 94.
- Suspected intermittents or opens at connectors can be detected with diagnostic service probe which permits voltage to be measured on wires without unplugging connectors. Ensure all terminals make good connection.
- When diagnosing intermittent problems, select MALF HISTORY from Tech 1 scan tester ABS menu. Supplemental data can be used to duplicate problem.
- Brake switch is normally held open by brake pedal. Pressing brake allows switch to close. Check brake switch adjustment.
Courtesy of GENERAL MOTORS CORP.
Courtesy of GENERAL MOTORS CORP.