Battery Undercharged
NOTE:
Ensure battery is fully charged and in good condition before performing the following steps. If battery is not at (or near) a fully charged condition, or if its condition is questionable, substitute a known good battery before proceeding.
- Check circuit No. 15A (battery ground). Check circuit No. 2B and 2C (fusible link wire) from battery positive to starter solenoid contacts and from starter solenoid contacts to alternator.
- Check for parasitic drains by performing parasitic load testing. See PARASITIC LOAD TEST under ON-VEHICLE TESTING. Check for constant engine running at low RPM. Check for excessive electrical drain.
- Using a carbon pile load tester, perform a alternator load test. See BATTERY/ALTERNATOR LOAD TEST (ARBST TEST) under ON-VEHICLE TESTING. Check for loose or broken drive belt.