LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 1992 >> SC Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Oxygen (O2) Sensor >> Installation

Oxygen (O2) Sensor: Installation

  1. Whenever an oxygen sensor is removed, threads must be coated with anti-seize compound before it is reinstalled. New oxygen sensors already have this compound applied to threads.
  2. Install oxygen sensor in exhaust pipe, and tighten sensor to 30 ft. lbs. (41 N.m). Reconnect electrical connector to oxygen sensor. Reconnect negative battery cable.
scientia non olet · About LEMON Manuals